Our Black Friday Deals have been EXTENDED! Don’t miss out!

Learn More!
Call us today! 1-800-436-8893

Water's Choice™ Clean & Drain

Brand: Water's Choice™

Product Description

What is Clean & Drain Spa Purge?

Clean & Drain is a spa purge product. When it’s time to clean and drain your spa, the best thing you can do is run Clean & Drain through your spa’s plumbing. This ensures that you will be starting over with fresh, clean water. It’s almost like having a brand-new tub.

Traditional chemicals systems require you to drain your spa two to four times a year. However, a spa treated with Waters Choice enzymes only needs to be cleaned and drained 1x per year.

It Is Literally The Best

We’ve spent years doing our research to bring this product to you! We tested and tested again other purge products against this one. We tried to find something that could out-perform it, but there wasn’t one. This is the best spa purge on the market! It’s the strongest, fastest, and easiest to use.

Clean & Drain in Swim Spas

If you are cleaning a Swim Spa that is using Waters Choice enzymes, you only need to clean and drain once every 3-5 years, instead of every year when using traditional chemicals. Swim Spas also hold a much larger amount of water and have extremely long plumbing lines that require 2-3 tubes of Clean & Drain to ensure a successful purge.

What if My Water Still Looks Great (in a year)?

We frequently hear the question, “Should I still drain my spa, even if the water looks great?” The answer is simple – stop water problems before they start. Use Clean & Drain every time you drain your spa to ensure crystal clear water every time. At Waters Choice, we care about you and want you to have the best spa experience.

Price: $19.95

Directions

1. When it is time to clean and drain your spa, add Waters Choice Clean & Drain purge product to your spa before draining. 2. Start with your water up to temperature. The warmer the better. 3. Remove the filter from the filter well and let it float in the seating area of the spa. This way, your filter will also get a deep clean. (Important note - your filter might need to be held under the water to ensure that it sinks and does not float on the surface. You don't want it to sit on top and not rotate around.) 4. Squeeze the entire tube of Clean & Drain into the filter area. Run spa for at least one hour with jets on high speed. 5. If you have diverter valves, turn them all the way one way for a cycle, then all the other way for the next cycle, then center them for the final cycle. 6. If you have an air blower, turn it on and off several times to allow the Clean & Drain to get into the plumbing. Give it enough time between on/off to allow lines to purge water and refill. 7. As the Clean & Drain does its job, you will see all kinds of gunk around the top that has come out of the lines. 8. The spa water will get very foamy. The foam could get very high, but doesn't usually overflow. However, if the foam does go over the sides, hose down immediately so that it doesn't dry on the housing. 9. When you are finished purging your spa and ready to drain, use a rag dipped in the existing spa water to wipe down the spa as it is draining. Do not let any gunk dry on the sides of the spa or the cleanup will be very difficult. After the spa has been drained, get a garden hose with a nozzle and hold up to all the jets and flush the lines with fresh water to get any dirty/soapy water out. 10. Refill with fresh water. Do not use irrigation water. 11. If your spa has not been purged for a long time, or ever, you may need to purge your spa twice to get the gunk out. 12. For the best results and the easiest water to take care of, use Clean & Drain every time you drain your spa. 13. NOTE: If you have a jetted bathtub, Clean & Drain will clean those lines as well. Follow the directions above, but use 1/3 to 1/2 of the tube depending on the number of jets and the amount of time since the last purge.

More from Water Maintenance